Products description
Coreless motor, ∅ approx. 17 mm, length approx. 18 mm for installation in model vehicles with a single shaft connection
Due to their special design, coreless motors have no cogging when they turn. Even at very low speeds, the drive shaft rotates completely smoothly. A model vehicle equipped with a coreless motor will move in a very realistic way and will not jerk at low speeds. In addition, they are significantly quieter than conventional model motors.
Technical Data:
- Voltage: 12 V DC
- No-load speed: 18500 rpm
- Rated speed: 16500 rpm
- No-load current: 35 mA
- Rated current: 293 mA
- Maximum current: 2450 mA
- Load torque: 15.7 gf cm
- System torque: 148.0 gf cm
You will find the detailed dimensions of this coreless motor in the accompanying drawing.
Assembly Tips:
- When selecting the size of the coreless motor, you can use the original motor as a guide. Alternatively, you can modify the chassis of your model and use a larger, more powerful motor. Please measure carefully before you order.
- When installing, fix all connection points to the shaft adapter as well as to the flywheel and the pinion with a fast-curing metal adhesive.
| Scope of Delivery: | 1 piece (outer packaging may vary) |
| Safety Note: | The article offered here is intended as a model-making item and not as a toy within the meaning of the EU Toy Directive. It should only be handed over to suitable persons. |
Product Features
Customer reviews:
Write the first Review!
Recommended products:
Accessories
Brass shaft adapter B1517, 1.5-mm motor shaft to 1.7-mm gear and flywheel for coreless motors.
Steel shaft adapter B1520, 1.5-mm motor shaft to 2.0-mm gear and flywheel for coreless motors.
Brass flywheel F008, 3 × 8.5 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Brass worm gear W0.3-3-5.5 (module 0.3, 3 × 5.5 mm) for 1.5 mm shafts, replacement for Fleischmann 567608. Fine-pitch worm for smooth, reliable power transmission in model railway drives.
Brass worm gear W0.4-4-5 (module 0.4, 4.0 × 5.0 mm) for 1.5 mm shafts. Replacement for Fleischmann 567601 and compatible Minitrix and Egger drives in fine-pitch model railway applications.
Brass worm gear W0.4-4-7 (module 0.4, 4.0 × 7.0 mm) for 1.5 mm shafts. Replacement for Fleischmann 567605 in fine-pitch model railway drives, suitable for repairs and conversions.
Brass worm gear W0.4-4-8 (module 0.4, 4.0 × 8.0 mm) for 1.5 mm shafts. Replacement for Fleischmann 567604 in fine-pitch model railway drives, suitable for repairs and conversions.
Brass worm gear W0.4-5-6 (module 0.4, 5.0 × 6.0 mm) for 1.5 mm shafts. Suitable for fine-pitch drives, repairs, conversions and as a replacement for various Minitrix locomotive drives.
Metal pinion G0.4-3.6-3.5-7T (module 0.4, 3.6 × 3.5 mm, 7 teeth) for 1.5 mm shafts in model railway drives; suitable as a replacement for selected Märklin gears and for repairs and conversions.
Metal pinion G0.4-4-3.5-8T (module 0.4, 4.0 × 3.5 mm, 8 teeth) for 1.5 mm shafts in model railway drives; suitable as a replacement for selected Märklin gears and for repairs and conversions.
Metal pinion G0.5-6-3-10T (module 0.5, 6.0 × 3.0 mm, 10 teeth) for 1.5 mm shafts; replacement for Fleischmann 564602 and ideal for model railway repairs and conversions.
Brass flywheel F005, 8 × 5 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Brass flywheel F006, 4 × 2 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Brass flywheel F007, 3 × 6 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Brass flywheel F010, 5 × 10 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Brass flywheel F012, 10 × 5 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Brass flywheel F015, 8 × 2.5 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Brass flywheel F016, 10 × 2.5 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Brass flywheel F017, 15 × 5 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Brass flywheel F018, 15 × 10 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Brass flywheel F022, 12 × 5 mm, for 1.5-mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Metal pinion G0.5-5-2-8T (module 0.5, 5.0 × 2.0 mm, 8 teeth) for 1.5 mm shafts; compact replacement gear for various Lima drives and for model railway repairs and conversions.
Metal pinion G0.5-7-3-12T (module 0.5, 7.0 × 3.0 mm, 12 teeth) for 1.5 mm shafts; replacement for Fleischmann 564601 and ideal for model railway repairs and conversions.
Metal pinion G0.5-8-3-14T (module 0.5, 8.0 × 3.0 mm, 14 teeth) for 1.5 mm shafts; replacement for Fleischmann 564604 and ideal for model railway repairs and conversions.
Metal worm gear W0.3-3.5-5 (module 0.3, 3.5 × 5.0 mm) for 1.5 mm shafts in fine-pitch drives. Ideal for model railway repairs, conversions and custom drives.
Metal worm gear W0.3-4-5 (module 0.3, 4.0 × 5.0 mm) for 1.5 mm shafts in fine-pitch drives. Ideal for model railway repairs, conversions and custom drives.
Metal worm gear W0.3-5-6 (module 0.3, Ø 5 × 6 mm) for 1.5 mm shafts. Fine-pitch worm for smooth, reliable power transmission in model railway drives.
Metal worm gear W0.4-3.5-5 (module 0.4, 3.5 × 5.0 mm) for 1.5 mm shafts in fine-pitch drives. Ideal for model railway repairs, conversions and custom drives.
Metal worm gear W0.5-5-6 (module 0.5, 5.0 × 6.0 mm) for 1.5 mm shafts in model railway drives. Ideal for repairs, conversions and custom drives.
New
Flywheel F023, 5 × 5 mm, for 1.5 mm shafts in coreless motor conversions. Improves coasting and provides smoother, more consistent running of locomotives and model vehicles.
Manufacturer Information:
A major advantage is the broad selection of retrofit solutions with matching manuals for N, H0/00 and other gauges, making repowering projects easier to plan and implement. Ideal for smoother running and targeted drive upgrades.
Contact Manufacturer
H3D-Art Toernooiveld 31
4873 DJ Etten-Leur
Netherlands
info@micromotor.eu
This Product was added to our catalogue on 27/12/2022.
Categories
Quick purchase
Welcome back!
Last viewed:
19,50 EUR
19,50 EUR per piece
19 % VAT incl. excl. Shipping costs
Features:Coreless Motors »
More information on your personal page »
Manufacturer
Micromotor.EU
Shipping country
Payment & Shipping
Shipping with DHL to over 220 countries from 6,94 EUR
Private customers pay immediately before the goods are dispatched.
Business customers, clubs, authorities pay by invoice (creditworthiness required).
GATRA Modellbau Union für Landschaft und Modelleisenbahn © 2026 | Template © 2009-2026 by modified eCommerce Shopsoftware