Pinion Gear G0.5-7-3-12T for 1.5 mm Shafts (12 Teeth, Replacement for Fleischmann 564601)

The metal pinion G0.5-7-3-12T is designed for model railway drives with 1.5 mm shafts. The 12-tooth gear transmits the motor torque reliably to the mating gear and is suitable for repairs, conversions and custom drives for locomotives and vehicles. It can also be used as a replacement for the Fleischmann gear 564601 (depending on the model).

Dimensions:

• Module: 0.5
• Bore (inner diameter): 1.5 mm (tolerance +0.05 mm, −0 mm)
• Outer diameter: 7.0 mm
• Length: 3.0 mm
• Number of teeth: 12

The precision-machined bore allows a play-free fit on shafts with 1.5 mm diameter. The outer diameter of 7.0 mm and the length of 3.0 mm make the pinion suitable for gearboxes with limited installation space and finely stepped gear ratios.

Properties and benefits of the pinion:

• 0.5 module tooth profile for smooth, even running
• 12-tooth pinion for finely stepped gear ratios in compact drives
• outer diameter 7.0 mm and length 3.0 mm for tight installation conditions
• precisely machined bore for a secure, low-play fit on 1.5 mm shafts
• suitable as a replacement for Fleischmann 564601 in various drives (depending on the model)
• ideal for repairs, conversions and custom drives in model railway applications

Together with a suitable mating gear, the pinion ensures quiet and precise power transfer from the motor to the drivetrain.

Handling notes:

• Always push the pinion straight onto the shaft without excessive force to avoid damaging the bore.
• Deburr the shaft ends slightly if necessary so the pinion can be pushed on cleanly.
• Align the pinion carefully to achieve the lowest possible runout.
• If necessary, secure the connection to the shaft with a fast-curing metal adhesive to reliably prevent twisting or slipping.